Chapter 5 - SPLTOOL
Batch Commands
The SPLTOOL
package contains a set of batch commands that makes performing options
on one or a group of spooled files much easier. These commands are similar
to the interactive commands discussed in Chapter 4
but the difference being these commands allow the use of generic names
or the *ALL parameter.
This means that
you can perform options on spooled files easily by such attributes and
file name, user, form type, output queue and user data.
The batch commands
available with SPLTOOL are:
Spooled
File to Folder - Batch (SPL2FLRB)
Spooled File To Folder - Batch (SPL2FLRB)
Type choices, press Enter.
Output queue . . . . . . . . . . __________ Name, *ALL
Library . . . . . . . . . . . *LIBL_____ Name, *LIBL
Spooled file . . . . . . . . . . __________ *ALL, generic*, Name
User Name . . . . . . . . . . . __________ *CURRENT, *ALL, Name
Job Name . . . . . . . . . . . . __________ *ALL, generic*, Name
Job Number . . . . . . . . . . . __________ *ALL, 000000-999999
Spooled File Number . . . . . . ________ *ALL, 1-9999
User data . . . . . . . . . . . __________ *ALL, User data
Form type . . . . . . . . . . . __________ *ALL, Form type
From Date (MMDDYYYY) . . . . . . *ALL______ Number, *ALL
To Date (MMDDYYYY) . . . . . . . *ALL______ Number, *ALL
Folder . . . . . . . . . . . . . ___________________________________________________
___________________________________
PC file extension . . . . . . . ___ Name
Merge spooled files . . . . . . *NO *YES, *NO
Replace file . . . . . . . . . . *NO *YES, *NO, *ADD
Stream file code page . . . . . 437 1-32767
Only file name . . . . . . . . . *NO *NO, *YES
File name . . . . . . . . . . . *NONE__ *JOB, *FILE, *USER, File name
Include blank pages . . . . . . *YES *YES, *NO
HTML Title . . . . . . . . . . . ___________________________________________________
_______________________________________________________________________________________
___________
Line selection . . . . . . . . . ___________________________________________________
_______________________________________________________________________________________
____________________________________________________________...
F3=Exit F4=Prompt F5=Refresh F12=Cancel F13=How to use this display
F24=More keys
|
- Output Queue - Enter
an output queue to select spooled files from or specify *ALL for all
output queues.
- Spooled file - Enter
a spooled file name to select spooled files, *ALL for all spooled files,
or a generic name ending with an asterisk (*).
- User Name - Enter
a user name to select spooled files, *CURRENT to specify the current
user, or *ALL to specify all user names.
- Job Name - Enter
a job name to select spooled files, *ALL to specify all job names, or
a generic job name ending with an asterisk (*).
- Job Number - Enter
a job number that identifies the spooled file or *ALL to specify all
job numbers.
- Spooled file number
- Enter a spooled file number to select a spooled file or *ALL to specify
all spooled file numbers.
- User Data
- Enter a value to select spooled files by user data or *ALL to specify
all user data attributes.
- Form Type
- Enter a value to select spooled files by form type or *ALL to specify
all form type attributes.
- From Date
- Enter a value to select spooled files by form date. This is the beginning
date. Specify *ALL for all spooled files.
- To Date
- Enter a value to select spooled files by form date. This is the ending
date. Specify *ALL for all spooled files.
- Folder - Enter the
name of the folder that exists on your AS/400 that you wish the new
document to be created in. The folder must exist. To check for the existance
of the folder, use the Work with Folders (WRKFLR) command.
- PC file extension
- Enter the extension of the new document. This value should be entered
for both automatic and manual file naming.
- Merge spooled files
- Specify if all spooled files in selection should be merged into one
file.
- Replace file
- Specify if the file created should replace an existing file.
- Stream file code page
- Specify the stream file code page that the resulting document should
use.
- Only file name
- If you wish to specifically name the target file, enter *YES in this
paramter and then enter a value on the file name parameter. If you want
SPLTOOL to automatically name the spooled files for you, enter *NO on
this parameter.
- File name
- If you specified *YES on the Only file name parameter, enter the file
name you wish SPLTOOL to name the target file. Special values for this
parameter are *USER, *JOB, and *FILE which will name the target file
with the user name, job name, or file name respectively. Entering *NONE
or leaving this parameter blank will tell SPLTOOL to automatically name
the files even if the Only file name parameter is *YES.
- Include Blank Pages
- Specify *YES to include blank pages, or *NO to omit blank pages from
the resulting file.
- HTML Title - Enter
the title of the document if you are copying the new file to an .htm
(web page) extension. This will set the title of the report.
- Line Selection
- This is used as an array to tell this command which lines of the spooled
file to omit. Placeing an "X" in a position will cause the
corresponding line to be ommitted from the new file. For example, if
position 2 contains a "X", the second line of every page of
the spooled file will be ommitted. This is used to remove standard headings
from every page of the new document.
Spooled
File to Stream File - Batch (SPL2STMFB)
Spooled File To Stream File - Batch (SPL2STMFB)
Type choices, press Enter.
Output queue . . . . . . . . . . __________ Name, *ALL
Library . . . . . . . . . . . *LIBL_____ Name, *LIBL
Spooled file . . . . . . . . . . __________ *ALL, generic*, Name
User Name . . . . . . . . . . . __________ *CURRENT, *ALL, Name
Job Name . . . . . . . . . . . . __________ *ALL, generic*, Name
Job Number . . . . . . . . . . . __________ *ALL, 000000-999999
Spooled File Number . . . . . . ________ *ALL, 1-9999
User data . . . . . . . . . . . __________ *ALL, User data
Form type . . . . . . . . . . . __________ *ALL, Form type
From Date (MMDDYYYY) . . . . . . *ALL______ Number, *ALL
To Date (MMDDYYYY) . . . . . . . *ALL______ Number, *ALL
Directory . . . . . . . . . . . ____________________________________________________
_____________________________________
File Name Prefix . . . . . . . . *JOB______________________
PC file extension . . . . . . . __________ Name
Only file name . . . . . . . . . *NO *NO, *YES
File name . . . . . . . . . . . *NONE_______________________________________________
______
Merge Spooled Files . . . . . . *NO *YES, *NO
Create directory . . . . . . . . *NO_ *YES, *NO
Public authority for data . . . *INDIR *INDIR, *RWX, *RW, *RX...
Public authority for object . . *INDIR *INDIR, *NONE, *ALL...
Replace file . . . . . . . . . . *NO_ *YES, *NO
Stream file code page . . . . . 437_______ 1-32767, *STMF, *PCASCII...
Include blank pages . . . . . . *YES *YES, *NO
HTML Title . . . . . . . . . . . ___________________________________________________
_______________________________________________________________________________________
___________
Line selection . . . . . . . . . ___________________________________________________
_______________________________________________________________________________________
____________________________________________________________...
Manufacturer type and model . . *WSCST
WSCST Name . . . . . . . . . . . QWPTIFFG4 Character value, *NONE
WSCST Library . . . . . . . . . QSYS Character value, *LIBL
Page width . . . . . . . . . . . 8.5 Number
Page length . . . . . . . . . . 11 Number
Page rotation . . . . . . . . . 0 0, 90, 180, 270
Margin offset . . . . . . . . . 20 Number
Left margin offset . . . . . . . 0 Number
Top margin offset . . . . . . . 0 Number
F3=Exit F4=Prompt F5=Refresh F12=Cancel F13=How to use this display
F24=More keys
|
- Output Queue - Enter
an output queue to select spooled files from or specify *ALL for all
output queues.
- Spooled file - Enter
a spooled file name to select spooled files, *ALL for all spooled files,
or a generic name ending with an asterisk (*).
- User Name - Enter
a user name to select spooled files, *CURRENT to specify the current
user, or *ALL to specify all user names.
- Job Name - Enter
a job name to select spooled files, *ALL to specify all job names, or
a generic job name ending with an asterisk (*).
- Job Number - Enter
a job number that identifies the spooled file or *ALL to specify all
job numbers.
- Spooled file number
- Enter a spooled file number to select a spooled file or *ALL to specify
all spooled file numbers.
- User Data
- Enter a value to select spooled files by user data or *ALL to specify
all user data attributes.
- Form Type
- Enter a value to select spooled files by form type or *ALL to specify
all form type attributes.
- From Date
- Enter a value to select spooled files by form date. This is the beginning
date. Specify *ALL for all spooled files.
- To Date
- Enter a value to select spooled files by form date. This is the ending
date. Specify *ALL for all spooled files.
- Directory - Enter
the name of the directory that resides in your AS/400 IFS that you wish
the new document to be created in. If the path does not exist and the
Create directory parameter is set to *YES, the path will be created.
- File Name Prefix
- If you are letting SPLTOOL name the target files for you, you can
specify a value here that will be used as a prefix for the filename.
You can enter any string, or the specify value of *JOB which will use
the job name as the file prefix.
- PC file extension
- Enter the extension of the new document. This value should be entered
for both automatic and manual file naming.
- Only file name
- If you wish to specifically name the target file, enter *YES in this
paramter and then enter a value on the file name parameter. If you want
SPLTOOL to automatically name the spooled files for you, enter *NO on
this parameter.
- File name
- If you specified *YES on the Only file name parameter, enter the file
name you wish SPLTOOL to name the target file. Special values for this
parameter are *USER, *JOB, and *FILE which will name the target file
with the user name, job name, or file name respectively. You may also
use the following substitution charachters: &F - File name &J - Job
Name &N - Job Number &U - User &S - Spooled File Number &R - User Data.
Entering *NONE or leaving this parameter blank will tell SPLTOOL to
automatically name the files even if the Only file name parameter is
*YES.
- Merge spooled files
- Specify if all spooled files in selection should be merged into one
file.
- Create directory
- Enter *YES if you want the target directory to be created if it does
not exist or *NO if you do not wish to create the directory.
- Public authority for
data - Enter the
public authority for data if a new directory is created.
- Public authority for
object - Enter
the public authority for object if a new directory is created.
- Replace File - Enter
*YES if you wish to replace the document if it already exists or *NO
to not replace the document.
- Stream file code page
- Enter the code page for the new document.
- Include Blank Pages
- Specify *YES to include blank pages, or *NO to omit blank pages from
the resulting file.
- HTML Title - Enter
the title of the document if you are copying the new file to an .htm
or .html (web page) extension. This will set the title of the report.
- Line Selection
- This is used as an array to tell this command which lines of the spooled
file to omit. Placeing an "X" in a position will cause the
corresponding line to be ommitted from the new file. For example, if
position 2 contains a "X", the second line of every page of
the spooled file will be ommitted. This is used to remove standard headings
from every page of the new document.
- Manufacturer Type and
Model - Used
when converting AFPDS spooled files to PDF.
- WSCST Name
- Used when converting AFPDS spooled files to
PDF.
- WSCST Library
- Used when converting AFPDS spooled files to
PDF.
- Page Length
- Used when converting AFPDS spooled files to
PDF.
- Page Width
- Used when converting AFPDS spooled files to
PDF.
- Page Rotation
- Used when converting AFPDS spooled files to
PDF.
- Margin Offset
- Used when converting AFPDS spooled files to
PDF.
- Left Margin Offset
- Used when converting AFPDS spooled files to
PDF.
- Top Margin Offset
- Used when converting AFPDS spooled files to
PDF.
Spooled
File to FTP - Batch (SPL2FTPB)
Spooled File To FTP - Batch (SPL2FTPB)
Type choices, press Enter.
Output queue . . . . . . . . . . __________ Name, *ALL
Library . . . . . . . . . . . *LIBL_____ Name, *LIBL
Spooled file . . . . . . . . . . __________ *ALL, generic*, Name
User Name . . . . . . . . . . . __________ *CURRENT, *ALL, Name
Job Name . . . . . . . . . . . . __________ *ALL, generic*, Name
Job Number . . . . . . . . . . . __________ *ALL, 000000-999999
Spooled File Number . . . . . . ________ *ALL, 1-9999
User data . . . . . . . . . . . __________ *ALL, User data
Form type . . . . . . . . . . . __________ *ALL, Form type
From Date (MMDDYYYY) . . . . . . *ALL______ Number, *ALL
To Date (MMDDYYYY) . . . . . . . *ALL______ Number, *ALL
IP address . . . . . . . . . . . ___________________________________
User ID . . . . . . . . . . . . ___________________________________
Password . . . . . . . . . . . . ___________________________________
Directory . . . . . . . . . . . ___________________________________________________
________________________________________
File Name Prefix . . . . . . . . *JOB______________________
PC file extension . . . . . . . __________ Name
Only file name . . . . . . . . . *NO *NO, *YES
File name . . . . . . . . . . . *NONE_______________________________________________
______
Put or Append . . . . . . . . . *PUT *PUT, *APP
FTP Representaction . . . . . . ASCII__________________________
Stream file code page . . . . . 437 1-32767
Merge spooled files . . . . . . *NO *YES, *NO
Include blank pages . . . . . . *YES *YES, *NO
HTML Title . . . . . . . . . . . ___________________________________________________
_______________________________________________________________________________________
___________
Line selection . . . . . . . . . ___________________________________________________
_______________________________________________________________________________________
____________________________________________________________...
Manufacturer type and model . . *WSCST
WSCST Name . . . . . . . . . . . QWPTIFFG4 Character value, *NONE
WSCST Library . . . . . . . . . QSYS Character value, *LIBL
Page width . . . . . . . . . . . 8.5 Number
Page length . . . . . . . . . . 11 Number
Page rotation . . . . . . . . . 0 0, 90, 180, 270
Margin offset . . . . . . . . . 20 Number
Left margin offset . . . . . . . 0 Number
Top margin offset . . . . . . . 0 Number
F3=Exit F4=Prompt F5=Refresh F12=Cancel F13=How to use this display
F24=More keys
|
- Output Queue - Enter
an output queue to select spooled files from or specify *ALL for all
output queues.
- Spooled file - Enter
a spooled file name to select spooled files, *ALL for all spooled files,
or a generic name ending with an asterisk (*).
- User Name - Enter
a user name to select spooled files, *CURRENT to specify the current
user, or *ALL to specify all user names.
- Job Name - Enter
a job name to select spooled files, *ALL to specify all job names, or
a generic job name ending with an asterisk (*).
- Job Number - Enter
a job number that identifies the spooled file or *ALL to specify all
job numbers.
- Spooled file number
- Enter a spooled file number to select a spooled file or *ALL to specify
all spooled file numbers.
- User Data
- Enter a value to select spooled files by user data or *ALL to specify
all user data attributes.
- Form Type
- Enter a value to select spooled files by form type or *ALL to specify
all form type attributes.
- From Date
- Enter a value to select spooled files by form date. This is the beginning
date. Specify *ALL for all spooled files.
- To Date
- Enter a value to select spooled files by form date. This is the ending
date. Specify *ALL for all spooled files.
- IP Address - Enter
the IP address of server name (if it is resolvable from your AS/400)
of the machine you wish to FTP the spooled file to.
- User ID - Enter the
User ID required to sign on to the remote FTP server.
- Password - Enter
the password required to sign on to the remote FTP server.
- Directory - Enter
the name of the directory of the remote machine you wish the new document
to be created in.
- File Name Prefix
- If you are letting SPLTOOL name the target files for you, you can
specify a value here that will be used as a prefix for the filename.
You can enter any string, or the specify value of *JOB which will use
the job name as the file prefix or the value of *USRDTA which will use
the user data as the file prefix.
- PC file extension
- Enter the extension of the new document. This value should be entered
for both automatic and manual file naming. &F - File Name, &J - Job
Name, &N - Job Number, &U - User ID, &S - Spooled File Number, &R -
User Data.
- Only file name
- If you wish to specifically name the target file, enter *YES in this
paramter and then enter a value on the file name parameter. If you want
SPLTOOL to automatically name the spooled files for you, enter *NO on
this parameter.
- File name
- If you specified *YES on the Only file name parameter, enter the file
name you wish SPLTOOL to name the target file. Special values for this
parameter are *USER, *JOB, and *FILE which will name the target file
with the user name, job name, or file name respectively. Entering *NONE
or leaving this parameter blank will tell SPLTOOL to automatically name
the files even if the Only file name parameter is *YES. The following
substitution variables may be used. &F - File Name, &J - Job Name, &N
- Job Number, &U - User ID, &S - Spooled File Number, &R - User Data.
- Put or Append
- Enter *PUT to put the file to the remote server. If the file already
exists on the target machine, it will be replaced. Enter *APP to append
the file to the remote server. If the file already exists, the data
will be appended to the file, otherwise the file will be created.
- FTP Representation
- Enter the FTP representation to use with the file transfer.
- Stream file code page
- Enter the code page for the new document.
- Merge spooled files
- Specify if all spooled files in selection should be merged into one
file.
- Include Blank Pages
- Specify *YES to include blank pages, or *NO to omit blank pages from
the resulting file.
- HTML Title - Enter
the title of the document if you are copying the new file to an .htm
or .html (web page) extension. This will set the title of the report.
- Line Selection
- This is used as an array to tell this command which lines of the spooled
file to omit. Placeing an "X" in a position will cause the
corresponding line to be ommitted from the new file. For example, if
position 2 contains a "X", the second line of every page of
the spooled file will be ommitted. This is used to remove standard headings
from every page of the new document.
- Manufacturer Type and
Model - Used
when converting AFPDS spooled files to PDF.
- WSCST Name
- Used when converting AFPDS spooled files to
PDF.
- WSCST Library
- Used when converting AFPDS spooled files to
PDF.
- Page Length
- Used when converting AFPDS spooled files to
PDF.
- Page Width
- Used when converting AFPDS spooled files to
PDF.
- Page Rotation
- Used when converting AFPDS spooled files to
PDF.
- Margin Offset
- Used when converting AFPDS spooled files to
PDF.
- Left Margin Offset
- Used when converting AFPDS spooled files to
PDF.
- Top Margin Offset
- Used when converting AFPDS spooled files to
PDF.
Spooled
File to Email - Batch (SPL2EMAILB)
Spooled File To E-Mail - Batch (SPL2EMAILB)
Type choices, press Enter.
Output queue . . . . . . . . . . __________ Name, *ALL
Library. . . . . . . . . . . . __________ Name, *LIBL
Spooled File . . . . . . . . . . __________ *ALL, generic*, Name
User name . . . . . . . . . . . __________ *CURRENT, *ALL, Name
Job Name . . . . . . . . . . . . __________ *ALL, generic*, Name
Job Number . . . . . . . . . . . __________ *ALL, 000000-999999
User data . . . . . . . . . . . __________ *ALL, User data
Form type . . . . . . . . . . . __________ *ALL, Form type
To Address . . . . . . . . . . . ___________________________________________
To Name . . . . . . . . . . . . ___________________________________________
From Address . . . . . . . . . . ___________________________________________
From Name . . . . . . . . . . . ___________________________________________
CC Address . . . . . . . . . . . ___________________________________________
CC Name . . . . . . . . . . . . ___________________________________________
BCC Address . . . . . . . . . . ___________________________________________
BCC Name . . . . . . . . . . . ___________________________________________
Subject . . . . . . . . . . . . ___________________________________________
Message Text . . . . . . . . . . ___________________________________________
MDN Address . . . . . . . . . . *NONE______________________________________
MDN NAME . . . . . . . . . . . . *NONE______________________________________
Importance . . . . . . . . . . . *NORMAL *NORMAL, *HIGH, *LOW...
Merge Spooled Files . . . . . . *NO *YES, *NO
Recipient Separator . . . . . . ',' Character value
Debug . . . . . . . . . . . . . *NO *YES, *NO
Debug File Name . . . . . . . . 'mailtooldebug.txt'________________________
Extra Attachment . . . . . . . . *NONE______________________________________
Send With Server Type . . . . . *IBMSMTP *MAILTOOL, *IBMSMTP
Mail Router . . . . . . . . . . *NONE
Use Mail Router . . . . . . . . *NO *NO, *YES, *ONLY
File Name Prefix . . . . . . . . *JOB______________________
PC file extension . . . . . . . __________ Name
Only file name . . . . . . . . . *NO *NO, *YES
File name . . . . . . . . . . . *NONE_______________________________________________
______
Stream file code page . . . . . 437_______ 1-32767, *STMF, *PCASCII...
Translate Table . . . . . . . . Q037337850 Name
Library . . . . . . . . . . . *LIBL_____ Name, *LIBL, *CURLIB
Mime header code page . . . . . 819 1-65535
WSCST Name . . . . . . . . . . . QWPTIFFG4 Character value, *NONE
WSCST Library . . . . . . . . . QSYS Character value, *LIBL
Page width . . . . . . . . . . . 8.5 Number
Page length . . . . . . . . . . 11 Number
Page rotation . . . . . . . . . 0 0, 90, 180, 270
Margin offset . . . . . . . . . 20 Number
Left margin offset . . . . . . . 0 Number
Top margin offset . . . . . . . 0 Number
Include blank pages . . . . . . *YES *YES, *NO
HTML Title . . . . . . . . . . . ____________________________________________
F3=Exit F4=Prompt F5=Refresh F12=Cancel F13=How to use this display
F24=More keys
|
- Output Queue - Enter
an output queue to select spooled files from or specify *ALL for all
output queues.
- Spooled file - Enter
a spooled file name to select spooled files, *ALL for all spooled files,
or a generic name ending with an asterisk (*).
- User Name - Enter
a user name to select spooled files, *CURRENT to specify the current
user, or *ALL to specify all user names.
- Job Name - Enter
a job name to select spooled files, *ALL to specify all job names, or
a generic job name ending with an asterisk (*).
- Job Number - Enter
a job number that identifies the spooled file or *ALL to specify all
job numbers.
- Spooled file number
- Enter a spooled file number to select a spooled file or *ALL to specify
all spooled file numbers.
- User Data
- Enter a value to select spooled files by user data or *ALL to specify
all user data attributes.
- Form Type
- Enter a value to select spooled files by form type or *ALL to specify
all form type attributes.
- To Address - Enter
the email address of the person you wish to email this spooled file
to.
- To Name
- Enter the name of the person you are emailing this spooled file to.
- From Address - Enter
the email address of the person sending the email.
- From Name - Enter
the name of the person sending the email.
- CC Address - Enter
the email address of a Carbon Copy recipient.
- CC Name - Enter the
name of the Carbon Copy recipient.
- BCC Address - Enter
the email address of a Blind Carbon Copy recipient.
- BCC Name - Enter
the name of the Blind Carbon Copy recipient.
- Subject - Enter the
text that you wish to appear in the subject line of the email.
- Message Text - Enter
the test that you wish to appear in the message body of the email.
- MDN Address
- Specifies the Message Disposition Notification email address to be
used. With some email clients, a receipt will be returned to this email
address when the email message is delivered to and read by the recipient.
Do keep in mind that this method is not foolproof and can be turned
off on the server or client level of the recipient. In some cases it
is not even supported. See RFC 2298. The possible values are: *NONE
- No MDN is requested *FROM - Use the "From" email address for the MDN
address.
- MDN Name
- Specifies the name to be used with the MDN email address. This parameter
will be ignored if *FROM is used for the MDNADDR parameter.
- Extra Attachment
- Enter the qualified names of any files you would like to attach to
the email besides the spooled file.
- Send With Server Type
- Enter *IBMSMTP
to send with the default IBM SMTP Server, or specify *MAILTOOL to send
using MAILTOOL Plus! (requires MAILTOOL Plus!)
- Mail Router
- Specify the IP address or domain name of the mail router to use to
send emails when specifying SENDWITH(*MAILTOOL). If no mail router is
used, specify *NONE.
- Use Mail Router
- If specifying a mail router to use, specify *ONLY to use only the
mail router, or specify *YES to use the mail router as a backup if none
of the host mail servers are reachable. (Note: If you are using a mail
router, most of the time you should specify *ONLY).
- Importance
- Enter the importance of this email. The valid values are *HIGH, *NORMAL,
and *LOW.
- Merge spooled files
- Specify if all spooled files in selection should be merged into one
file.
- Recipient Seperator
- Enter the seperator to be used with multiple addresses. It is advised
to leave this as the default.
- Debug
- Entering *YES will produce a debug file for the email that is sent.
- Debug File Name
- Enter the name of the debug file that is produced.
- File Name Prefix
- If you are letting SPLTOOL name the target files for you, you can
specify a value here that will be used as a prefix for the filename.
You can enter any string, or the specify value of *JOB which will use
the job name as the file prefix.
- PC file extension
- Enter the extension of the new document. This value should be entered
for both automatic and manual file naming.
- Only file name
- If you wish to specifically name the target file, enter *YES in this
paramter and then enter a value on the file name parameter. If you want
SPLTOOL to automatically name the spooled files for you, enter *NO on
this parameter.
- File name
- If you specified *YES on the Only file name parameter, enter the file
name you wish SPLTOOL to name the target file. Special values for this
parameter are *USER, *JOB, *FILE, and *USERD which will name the target
file with the user name, job name, file name, or user data respectively.
You may also use the following substitution charachters: &F - File name
&J - Job Name &N - Job Number &U - User &S - Spooled File Number &R
- User Data. Entering *NONE or leaving this parameter blank will tell
SPLTOOL to automatically name the files even if the Only file name parameter
is *YES.
- Stream file code page
- Enter the code page for the new document.
- Translate table -
Enter the library and name of the translation table you wish to use
during the conversion to a document.
- Mime header code page
- Specify the code page to use to build the MIME header for the email
to be sent. Most of the time you don't have to change this value.
- WSCST Name - Top Margin
Offset - These
parameters were added for compatibility with the AFPTOOL command. When
using SPL2EMAIL on an AFP spooled file, AFPTOOL will be called to create
the file.
- Include Blank Pages
- Specify *YES to include blank pages, or *NO to omit blank pages from
the resulting file.
- HTML Title - Enter
the title of the document if you are copying the new file to an .htm
or .html (web page) extension. This will set the title of the report.
- Manufacturer Type and
Model - Used
when converting AFPDS spooled files to PDF.
- WSCST Name
- Used when converting AFPDS spooled files to
PDF.
- WSCST Library
- Used when converting AFPDS spooled files to
PDF.
- Page Length
- Used when converting AFPDS spooled files to
PDF.
- Page Width
- Used when converting AFPDS spooled files to
PDF.
- Page Rotation
- Used when converting AFPDS spooled files to
PDF.
- Margin Offset
- Used when converting AFPDS spooled files to
PDF.
- Left Margin Offset
- Used when converting AFPDS spooled files to
PDF.
- Top Margin Offset
- Used when converting AFPDS spooled files to
PDF.
<<Previous
| Next>>
|
